cool, thx.


"jim beam" <nospam@example.net> wrote in message
news:gJednYi5v8lLWqbcRVn-qQ@comcast.com...
> item 3.
>
> Fish wrote:
> > perfect. i have seen just that. i had an assistant rev the engine
slightly
> > and the engine rocked quite a bit. it seems like a simple project to
> > replace the inside of that rear mount, [relatively to other projects i
have
> > done], so thanks for the confirmation howard.
> >
> > its my understanding that the rear mount can be repaired by replacing
the
> > insert, is this your understanding howard? or, do i need to replace the
> > whole mount? looking at this picture in the link provided below, can
you
> > tell me what item number is the rear mount?
> >
> >
http://www.hondaautomotiveparts.com/...+ENGINE+MOUNTS
> >
> > tom
> >
> > "Howard" <howardh1951at@hotmail.com> wrote in message
> > news:0aP_c.21512$Np2.17690@bignews4.bellsouth.net. ..
> >
> >>Another way of testing is to start engine, put the car in drive, press
on
> >>the brake and give it some gas while someone is watching under the hood.
> >
> > If
> >
> >>you see more than 2 or 3 inches of rngine rock or movement, Jim Beam is
> >>correct. Replace rear motor mount.
> >>Good luck,
> >>Howard
> >>"Fish" <fishingrod45@hotmail.com> wrote in message
> >>news:9Av_c.300220$fv.180665@fe2.columbus.rr.com. ..
> >>
> >>>hello folks.
> >>>
> >>>has anyone run across a situation where the motor of a 1998 civic
> >
> > rotates
> >
> >>on
> >>
> >>>acceleration to the point where the exhaust compression joint, just
> >
> > below
> >
> >>>the down pipe, separates and makes a 'clunk' noise? if so, or if you
> >
> > can
> >
> >>>imagine this, please tell me which motor mounts need replaced, or if a
> >>>damper can be installed to resolve this. is this a recall or TSB by
any
> >>>chance?
> >>>
> >>>thx.
> >>>fish.
> >>>
> >>>
> >>
> >>
> >
> >
>