In the event that someone has tried to remove the screws and messed
the philips shots up, a 1/4" drill bit will remove the head of each screw
and then a vicegrip will take the remaining stud out after the rotor is off.

The philips slots makes centering the drill easy too.

chuck

>
> > On my '99 they're held on by two phillips screws, but I couldn't get
> > these screws off. I took the entire hub off and had a local auto parts
> > shop with a machine shop remove them for $10 a piece. Give that a
> > shot. Good luck.
> >
>
> You could have bought an impact driver (about CAD$30 for a really good
> one). After breaking my fingers for half an hour trying to loosen up
> those screws on my 01 Prelude SE, I gave up and bought the impact
> driver. It literally took 5 seconds to take out each screw.
>
> The impact driver works in reverse as well, tightening the screws far
> better than with your bare hands. And because of the way it works, there
> is no chance of stripping the screw.
>
> Cosmin