On my '99 they're held on by two phillips screws, but I couldn't get
these screws off. I took the entire hub off and had a local auto parts
shop with a machine shop remove them for $10 a piece. Give that a
shot. Good luck.


"G-Man" <g_foreman@yahoo.com> wrote in message news:<10hvm7dg5mo9hb5@news.supernews.com>...
> Looks like the bastard is pressed on. Off to the shop if I have to replace
> them :-)
>
> Haven't measured them, but 146k on the car and they've never been replaced.
> They don't pulse, so I may just go new pads.
>
> Sure is easier on my 2001 EX V6, they rotors come right off!
>
> G-Man
>
>
> "G-Man" <g_foreman@yahoo.com> wrote in message
> news:10hvldeic25f332@news.supernews.com...
> > I looked and the big nut does not seem to be part of the stuff holding the
> > rotor on. Maybe I'm wrong, but that's how it looks.
> >
> > G-Man
> >
> >
> > <kiselink@mindspring.com> wrote in message
> > news:dahvh0lvlucf75i0elmlq5rf2lsiaqp970@4ax.com...
> > > Do a search on dejanews.com and you will find much discussion on your
> > > question. You need to take that big hub nut off which is torqued
> > > around 200 lbs I think. I'd like to know if anyone has done it with
> > > hand tools.
> > >
> > > Newer models of accords are more servicable.
> > >
> > > Good luck!
> > >
> > >
> > > On Sun, 15 Aug 2004 16:18:03 -0400, "G-Man" <g_foreman@yahoo.com>
> > > wrote:
> > >
> > > >There are four bolts on the front rotors (besides the studs). Will the
> > > >rotor come off after removing these? My '91 had the rotors pressed on.
> > > >Looks like I can get these off myself. Correct?
> > > >
> > > >G-Man
> > > >
> > >
> >
> >