I tried to remove that hub nut with a hydraulic floor jack under a
ratchet wrench, and all I managed to do was break the wrench. I tried it
with a regular fixed wrench, and when it started to bend I gave up.
Because once you remove than nut off, the rotor is still pressed in, so
you need an extractor to pull it out.

It ended up costing me CAD$150 in labour at my mechanic, and even he
complained that one of the rotors was a pain to take off, it was THAT
stuck...

Cosmin

kiselink@mindspring.com wrote:
> Do a search on dejanews.com and you will find much discussion on your
> question. You need to take that big hub nut off which is torqued
> around 200 lbs I think. I'd like to know if anyone has done it with
> hand tools.
>
> Newer models of accords are more servicable.
>
> Good luck!
>
>
> On Sun, 15 Aug 2004 16:18:03 -0400, "G-Man" <g_foreman@yahoo.com>
> wrote:
>
>
>>There are four bolts on the front rotors (besides the studs). Will the
>>rotor come off after removing these? My '91 had the rotors pressed on.
>>Looks like I can get these off myself. Correct?
>>
>>G-Man
>>
>
>