1.Disconnect the negative, then the positive battery cable..















2.Wait at least three minutes before performing any repair.















3.On the 1.8L engine, remove the air intake duct.















4.Remove the starter cable from terminal B located on the back of the solenoid.















5.Remove the black/white wire from the S (solenoid) terminal.















6.Remove the two starter mounting bolts, then remove the starter from the vehicle.































Installation is the reverse of the removal procedure















































and here's a way to rebuild the starter by spending only $20.































http://www.team-integra.net/forum/di...TopicID=123037