Tegger wrote:
> Justin <justin@nobecauseihatespam.com> wrote in
> news:hcsg2j$muj$1@news.eternal-september.org:
>
>> Tegger wrote:
>>> Justin <justin@nobecauseihatespam.com> wrote in news:hcrchl$fdt$1
>>> @news.eternal-september.org:
>>>
>>>> I think its pretty much an accepted fact Hondas and Acuras from the
>>>> early 2000's has brake warping issues.
>>>
>>>
>>> And you know this....how?
>> I did my research?
>
>
>
> And what was your research? Did it include the issues mentioned here?:
> http://www.brakeandfrontend.com/topi...torsDrums.aspx
>
>
>> One thing I will check out is the torque on the lugs.
>> It should be 80.
>
>
>
> Evenness of torque between the lug nuts has little or nothing to do with
> it.
>
>
>
>> Also based on my research - slotted and cross drilled rotors on a
>> street car is a waste. Better quality normal rotors might be in order
>> - there have to be some that won't break the bank.
>>
>
>
> Before you spend even one penny on crappy aftermarket, try reading some of
> those articles in the page I referenced above.
>
> Especially, go to the 4th page in, and see the article entitled "10 of Your
> Top Brake Pulsation Questions".
>
>


Will do.
I'm not doing anything for a while so I have time.