View Single Post
  #7 (permalink)  
Old 26 Oct 2009, 06:06 pm
Tegger
Guest
 
Posts: n/a
Default Re: 92 Accord Temperature Gauge Problem

Face <face@yahoo.com> wrote in
news:face-B6A749.17555426102009@newsfarm.iad.highwinds-media.com:

> In article <Xns9CAFE3AC9711Ctegger@208.90.168.18>,
> Tegger <invalid@invalid.inv> wrote:
>


>>
>> The danger here is the short in the sender unit may have caused
>> damage to the gauge, so if the temperature gauge still acts oddly,
>> you may have to get another one. You can find a cheap replacement at
>> a wrecking yard.

>
> The dealer didn't have one in stock so they had to order one. They
> said it would be a day or two. I left the unit unplugged. Hopefully
> the gauge is still ok. I don't really want to have to pull the
> instrument cluster. If it is I'll start calling junk yards.




You're probably OK. It's probably more likely the sender has just lost some
of its resistance rather than actually shorted. The loss of resistance can
be detected with a multimeter (S/B 142 ohms at cold, approx 35 at full op-
temp).

Some clarification: the "sender" unit isn't really a "sender", but a
variable grounder. Current goes through the gauge and then to ground
through the sender. The sender has variable resistance that decreases with
increased coolant temperature. Decreased resistance means more current
flowing to ground and a higher gauge needle reading.


--
Tegger

The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/
Reply With Quote