Joe <joe@spam.hits-spam-buffalo.com> wrote in
news:slrnhdg81j.bm1.joe@barada.griffincs.local:


>
> If the inside and outside wear at different rates, it points to the
> pins not moving freely.


Or one pad being clamped much more than the other on account of rust.


> Did you disassemble and re-grease them, then
> put them back together right, or did you just test that they moved,
> then leave them be?
>
> The rears (especially) need the full service done each time. They get
> a lot of crap from the road splashed on them.



The primary problem with the rears is that they never get very hot, so
moisture doesn't boil off them. This means they rust like crazy.

I can't quite remember how hot the fronts got last time I checked, but the
rears only get up to about 90-100F max. I think the fronts get up to about
140-160F under normal use.



--
Tegger

The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/