Joe <joe@spam.hits-spam-buffalo.com> wrote:

> If the inside and outside wear at different rates, it points to the
> pins not moving freely. Did you disassemble and re-grease them, then
> put them back together right, or did you just test that they moved,
> then leave them be?

The Brembo brake pads on my BMW motorcycle wore so unevenly that I rotated
them at every oil change. I forget which side wore faster, but I presume
it had to do with a single piston, essentially pushing one pad against the
disc which then had the added burden of moving the caliper before the other
pad touched.


--
Clarence A Dold - Hidden Valley Lake, CA, USA GPS: 38.8,-122.5