With the short shifter it makes it stiffer/harder to shift anyway tho.
Might just take some getting used to.


"rastapasta" <NOSPAM_rastapasta @ ev1.net_NOSPAM> wrote in message
news:10ca6e0o06a8ff8@corp.supernews.com...
>
> "Jehu" <dcoxREMOVETHIS@hfx.eastlink.ca> wrote in message
> news:RK6xc.2375$vO1.21160@nnrp1.uunet.ca...
> > Well I found the problem with the noise/vibration from my shifter. The
> > bottom of the shifter was rubbing on the exhaust when the car was engine
> > breaking causing it to vibrate.
> >
> >
> > "Jehu" <dcoxREMOVETHIS@hfx.eastlink.ca> wrote in message
> > news:Rpxuc.48289$kc2.736387@nnrp1.uunet.ca...
> > > Hey, I just recently had a short throw shifter installed on my car
> (2000
> > > civic SiR/Si in US). Works great except when in 2nd or 3rd and the
car
> is
> > > slowing it self down/engine reving the shifter vibrates and makes a
> > rattling
> > > noise. By placing my hand on it it goes away.
> > >
> > > Is this because there is something loose that wasn't put back on
right?
> > > any suggestions would be great.
> > >
> >
>
>
> I had a short-shifter put on my Teg not too long ago, & the guy said he
> would have to cut the heat shield a bit to make it (the s.s.) fit, so I
gave
> him the ok to do it. I still feel it grind something (the heat shield?,
but
> not the gears) a bit sometimes, & sometimes it doesn't want to go into 1st
> too easily. Oh well.
>
>
> ---
> Outgoing mail is certified Virus Free.
> Checked by AVG anti-virus system (http://www.grisoft.com).
> Version: 6.0.700 / Virus Database: 457 - Release Date: 6/6/2004
>
>