"Vike201" <newbeetle@comcast.net> wrote in
news:UBa%l.6064$hE.1424@newsfe13.iad:

> Hello,
>
> I'm new to this list. I'm doing rust repair on my daughters 1994
> Accord and I can't figure out how to remove the plastic rocker panels.
>
> Any help would be appreciated.
>
> Eric
>




There are two small screws in the front. Remove them.

There are nine black pins in the underside. They consist of two pieces (a
middle and an outer piece. You use a very thin-blade screwdriver to pull
the middles out of the outers. Then you remove the outers from the trim.

At this point, you now slide the trim forwards about 3/8", then lift it
away from the car to unhook it from the white side clips. Might need to
wiggle a bit, but be CAREFUL. There is no need to "break" things.


--
Tegger

The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/