"lobo" <el_lobo@nowhere.net> wrote in
news:xawWl.31662$YU2.14394@nlpi066.nbdc.sbc.com:

> Can't seem to get rid of this code as it keeps reappearing and have
> replaced the bank 1sensor . I have been trying to find what voltage
> readings I should have on the vehicle side plug to the 4 wire bank 1
> sensor as my manual does not seem to indicate that. I have 12 volts
> (key on-not running) on one of the unplugged heater pins to body
> ground but not on the other. I am thinking I should have 12 volts on
> both?
>
> Thanks in advance,
> Ray
>
> 1999 Accord
> F23A1
>
>



I'm seeing in the Aug/05 issue of Honda Service News that an alternator
wire short to ground can cause this DTC, as well as imtermittently blowing
fuse #6. You might want to take a very close look at the BLK/YEL alternator
wire.


--
Tegger

The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/