The 90's honda rotors can be removed w/o damaging the bearings
if you use 2 10mm bolts and beat on them. It is still quite a task. I
got an article from the web a few months ago when I worked on my
97. I have since helped a friend with his as well. I just tried to search
the web and could not find the article again, so I uploaded a copy of it
to my page.

see the link below.

http://home.earthlink.net/~csmoko/3501.pdf

Chip Stein wrote:

> "G-Man" <somebody@yahoo.com> wrote in message news:<104f23t5ou4mt60@news.supernews.com>...
> > I've done my 2001 and a friends 2001 with no problem. But according to the
> > manual, you must remove the control arm, pull the axle out on the '91. Is
> > this true? Might be time for a shop!
> >
> > G-Man
>
> the hub presses into the bearing and the rotor is trapped between. a
> press is the right way. a lot of people beat them out but that just
> creates flat spots on the bearings.
> Chip