I have an 96 honda accord lx nonvtec automatic. I have the tei distributor.
I am putting an ignition system in my car today its the accel 49310. Problem
is in the manual it says after my rotor is off to look for a red and white
wire that goes to the coil. Well I looked all ay at my distributor I even
have the icm out. I cannot find those wires anywhere in my distributor. The
wires I am looking for is a 12v+ power supply(ring terminal) and a Module
switched Signal(Flag terminal). The wires on the icm is a yellow/green,
black/yellow, green, and dark green. Theres also a blue wire somewhere in my
distributor. My haynes manual does not have my distributor in it.