"Broomick" <broomick@yahoo.com> wrote in message
news:r2k820hta8h1mu6banft2itho05fr5rkud@4ax.com...
> Your clutch is Hydraulic. Fill up the fluid resorvoir on the firewall
> right above the steering column using regular brake fluid. You may
> have to pump it a few times to get it going again. Your clutch slave
> cylinder is probably leaking causing the resorvoir to loose fluid.
>
>

That is what has me perplexed-- I do not seem to be losing any fluid. I
topped it up (less than 1/2 ounce), and the problem does not seem to get any
better. When I first start the car after sitting for a little while, the
clutch will work well enough to allow the shifting of gears. After about 5
seconds or so, the shifting of gears becomes impossible.

Thanks for your input