Dave,
Does the motor seem like it's running at all? The reason
I ask is I had a problem with the power windows on my
89 LXi. I unnecessarily took the glass and motor out
only to find it was the "black box" that allows the window
to go all of the way down with a button push. After getting
the door apart (and that was no fun), I was bummed to
find the motor was good.

Below is my post from yesterday.

Subject: Re: 91 Accord doesn't start
Newsgroups: alt.autos.honda

Besides fixing several MAIN relay's on my and a few
other Hondas, my 89 accord had a power window
controller that went bad. Guess what; it had a broken
solder joint much like the MAIN relay problem. What's
going on with Honda's soldering? It could also be a
design issue of not properly bracing a component to the
printed circuit board and just depending on the solder to
hold it. Then with vibrations and jolts that in an environ-
ment like a car, eventual failure.

Good luck,
chuck

DaveC wrote:

> Driver's window stopped on this LX 4-door. Switch wouldn't do anything. If I
> hold the switch up or down and give the window a tug, it will continue to the
> top or bottom.
>
> Is this the motor going out? If so, I see that they list for almost $300 and
> retail for a bit over $200. Can these be rebuilt? Anyone done this? Are
> brushes easy to replace on these?
>
> How tough is the motor and regulator to get out of these cars?
> --
> DaveC