View Single Post
  #6 (permalink)  
Old 17 Nov 2008, 07:35 pm
Woody
Guest
 
Posts: n/a
Default Re: How do I test a cruise control switch?

Pins 2 & 3 are the switch and should be made when the switch is active. The
cruise light is between pins 1 & 2. The light between pins 4 & 5 comes on
with the combination light switch. Fuse 6 in the drivers under dash fuse box
supplies power to pin3 when the ignition is on. Power is sent through the
switch out pin 2 to the cruise control unit. If you are going to service the
Odyssey yourself you should invest in the OEM service manual from HelmInc.
It has the diagrams and test information. You probably have a connector
loose somewhere in the dash.
"blu" <brian.utterback@gmail.com> wrote in message
news:1c53559d-f1a6-4cef-96ec-2053f971b096@a26g2000prf.googlegroups.com...
>I recently changed the background light in the clock on my wife's 1999
> Honda odyssey which involved taking the dashboard apart. After I got
> it all back together, my wife noticed a couple of days later that the
> cruise control no longer works. The light in the switch does not light
> and the cruise control does not engage.
>
> I re-seated the connector to the switch (which I never disconnected in
> the first place) but that had no effect. I checked the fuse, but the
> fuse for the cruise control is okay. I removed the switch entirely to
> test the continuity with a volt-ohm meter, but since I don't know what
> pins should have continuity in the two positions, I can't really say
> whether or not the switch works.
>
> However, what I found doesn't sound like it can be right. There are 5
> pins on the back of the switch. I checked each pair of pins and found
> that when the switch was in the disengaged position, no pairs of pins
> had any continuity at all. When the switch was in the engaged
> position, only pins 3 and 4 make a connection with each other, while
> all of the others remain disconnected. There are two lights I can see
> embedded in the switch and I think that one comes on with the
> headlights and the other comes on when the switch is engaged.
>
> So, does it sound like I need a new switch, or is there another
> problem?
>
> Brian Utterback



Reply With Quote