tflfb wrote:
>
> When adjusting the valves on a CR-V, are you turning the engine over with
> the crankshaft bolt?
>
> How are you acessing the crankshaft bolt? ( top .wheel houseing )
>
> I am going to take the spark plugs out to replace them, while I adj. the
> valves.
>
> Thanks.
>
> Tom

==============

With the plugs out, you can just use the power steering nut to turn it
over. It's on pretty tight. If you're unsure, there's a hole in the
splash shield for an extension and a 19mm socket.

'Curly'

=============