i had a 1990 accord and it would drive fine but after about 4 or 5 miles of
driveing the grease in the cv joint would thin out and the bearings would
move and cause i vibration. so it could be the cv joint.


"amsjsj" <amsjsj@cox.net> wrote in message
news:Q0cNb.1201$_H5.1152@lakeread06...
> Your rotors need to be cut, same exact problem i had.
>
> "Newsgroups" <jetking@pacbell.net> wrote in message
> news:0pCLb.8984$km2.7923@newssvr25.news.prodigy.co m...
> > I am having high speed vibration problems when I apply the breaks at
about
> > 50 mph and above, the front end shimmies like crazy. Once I release the
> > brake pedal, it goes away. Is this an idication of an alignment problem
or
> a
> > break problem? Thanks for the help.
> >
> > Turbineking99
> >
> >
>
>