View Single Post
  #18 (permalink)  
Old 20 May 2008, 05:33 pm
Tegger
Guest
 
Posts: n/a
Default Re: Tegger's 'Teg needs a cat - UPDATE

Grumpy AuContraire <Grumpy@ExtraGrumpyville.com> wrote in
news:ir2Yj.355282$cQ1.193918@bgtnsc04-news.ops.worldnet.att.net:

>
>
> Tegger wrote:


>>
>> I'm going to a muffler shop this morning to see if it's possible to
>> weld up the holes so I can get a few more months out of the cat.
>>

>
>
> 1. You're lucky you didn't burnd down the whole damned town.
>
> 2. Them's not holes, tha's cratering!




It's better than the pics make it look. The noise is a lot less than what
your average fart pipe makes, but is loud enough to be annoying to somebody
no longer 18 years-old.


>
> 3. Looks like you will have to find a suitable substitute. Save the
> front 'n rear sections as some welding/brazing might be necessary to
> make a generic unit work.




Everything's rotted; can't save any of it. Front pipe ("A" pipe) has to be
replaced as well, as the flange is very thin after 17 years of rusting.



>
> But most of all... Howdidya evah pass emmissions?
>



Guess last spring the holes were small enough not to be noticeably loud.
Besides, the heat shield would have covered them.


--
Tegger

The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/
Reply With Quote