On Apr 7, 8:44 am, motsco_ <mots...@interbaun.com> wrote:
> techjoh...@gmail.com wrote:
> > Hello, Group:
>
> > Recently I brought my car into the repair shop to have a new catalyst
> > converter and o2 sensor replaced. After all the work was done, when
> > I'm idle and goto accelerate my car jerks. This happens only when I
> > begin to accelerate after being stopped.
>
> > The repair shop had to do some welding to install the catalyst
> > converter, which was an after market catalyst converter.
>
> > --JP
>
> ----------------------
>
> What mileage, what tranny? Is your CHECK ENGINE light still
> participating in the 'test' when you first turn the key to position II?
> Look in the owner's manual if you don't know how to do that part.https://techinfo.honda.com/rjanisis/...01_OMANUAL.asp
>
> 'Curly'

The tranny has less than 75K miles on it. Check engine light is
gone. It ran smoothly until I left the repair shop. I'm not sure if
the check engine light is still participating anymore, I will have to
watch next time I turn the car on.