"JACK" <totallc@mindspring.com> wrote in
news:13ujeduo94dl22b@corp.supernews.com:

> Yeah I've checked that too. And BTW, I've also run the gear shifter
> through all settings while trying the ignition just to see if it was
> that switch. Nothing.
>
> I just don't get it.
>
> Thanks
> Jack
>
>
>
>
> "Tony Hwang" <dragon40@shaw.ca> wrote in message
> news:uwhGj.122457$pM4.85174@pd7urf1no...
>> JACK wrote:
>>
>>> I thought it was the starter so I changed it out. Battery is full.
>>> When the key is turned, The inside relay clicks, I've changed out
>>> the relay in the engine compartment. I've checked the fuse in the
>>> fuse panel. It's almost like the power is never getting all the
>>> way to the starter. All other aspects look good from what I've
>>> checked.
>>>
>>> Any ideas? Please help, really can't afford a shop, but need it
>>> quickly.
>> Hi,
>> If you think that, then how about checking the battery cables to make
>> sure they are in good shape making an good connection.
>
>
>

I guess you have to use a meter or test light to trace back from the
starter solenoid to see where you lose the 12v from the ignition switch.

It might be a worn ignition switch,or the main relay is bad.
(that can be resoldered,if you know how to solder)

--
Jim Yanik
jyanik
at
kua.net