CoreyK wrote:
>
> I am replacing the brake roters on my 1990 accord. After taking off all
> the nessesary things i can not take the disc off because of this large
> bolt. The bolt is in the center and won't come off, do i have to take
> it to a mechanic or can i do this with the right tools myself. Thanks
>

If the "large bolt" in the "center" is the axle nut, then yes, you will need
to take it off. This is usually the first step in the process of removing
the brake rotors. You can either use a 1/2" impact gun to remove it, or you
can reassemble the suspension to the point where you can use the brakes to
prevent the hub from turning and use a 24" breaker bar to loosen the nut.

http://www.honda.co.uk/owner/AccordManual/400/12-18.pdf

Eric