"Cory Dunkle" <cadnews@verizon.net> wrote in message
news:zMykb.3167$Vf7.1840@nwrdny02.gnilink.net...
> Most of the time after I first start it up when I put it in reverse it
will
> grind slightly.

Sounds like the clutch is not quite releasing fully. If you have a hydraulic
clutch, perhaps the slave is leaking, or there's wear in the pedal pivots.
In any case, there's no synchro on reverse, and when the oil is cold, the
gears spin due to viscous drag.

If there's no slop in the pedal or hydaulics, just push in the clutch, wait
a bit longer then select reverse.

Stewart DIBBS