There are 3 possible issues with the use of this cluster in your car:1. If your car is an auto, you will no longer get a gear indicator (not necessarily a problem but worth considering).2. If the bezel around your stock gauges (the plastic panel with the 3 cutouts is any different you may have fitment issues as I believe this seller only includes the gauges, not the bezel. Even if your bezel matches, you may have slight issues with fitment because these are not a Honda part.3. Your vehicle is not currently wired to operate a tachometer. Hooking this up is fairly simple, but you would have to run a wire from the engine compartment up into the dash. There is a good chance you would have to modify or even replace the molex plugs coming from your factory wiring harness so that you could plug the tach wire into the vader gauges.