Can be done sans press. Lots of banging with big, heavy hammer to remove old
joint. Install using a large "C"-clamp and socket of sufficient diameter and
depth to allow new joint to seat in the arm.

Dave D

--
Hunt hard...Kill quick...Offer No Apologies!
"David" <luthier@nospamtoad.net> wrote in message
news:3f8a1782.2897937@news.toad.net...
> Hello,
>
> I'm replacing the lower ball joint on a 95 Honda Civic. What kind of
> press do you need to do this. Can it be rented???
>
> Any advice would be welcome.
>
> Thanks
>
> David