View Single Post
  #3 (permalink)  
Old 27 Oct 2007, 11:42 am
Mark L Mark L is offline
Junior Member
 
Join Date: Sep 2007
Posts: 10
Default

It would be helpful if you had a haynes repair manual on your car. But here is how you do it. First you need to raise the front or just one side of your car. Take the wheel off. On the brake caliper (the thing that the pads are in) there will be two bolts on the inside you will need to take off. Take these off and then pull the caliper off of the brake rotor (the round silver disc). Remove the pads one at a time and then replace with new ones the same way the old one came off. Make sure the rotor is in at least OK shape. If it is in bad shape (gouged very badly) it will have to be replaced. All in all replacing the two rotors and a set of pads should be around $75.00. $20 for the pads, $25 each for the rotors. If the rotor aren't to bad use them for now. Good luck
Reply With Quote