On Sep 12, 1:04 am, John Horner <jthor...@yahoo.com> wrote:
> bigjcw1...@gmail.com wrote:
> > I replaced my rotors and pads on my 1997 CRV with bendix parts. About
> > 1000 miles later after driving at highway speed for 20 mile or so and
> > then going to slower speed around 35MPH I get squealing from the
> > brakes. I press the pedal to start stopping and the noise stops.
> > What did I do wrong, or miss? The vehicle started doing this before I
> > replaced the brakes, BUT I figured that it was worn parts becuase the
> > pedal vibrated too. The pedal no longer vibrates and the vehicle
> > seems to stop good. Thanks for your input.
> > Joel
>
> Did you use top-of-the line replacement parts or the lowest grade?
> I've had good luck with both factory parts and with the highest grade
> aftermarket parts like Raybestos QuietStops. I've had noisy brakes on
> several vehicles with middle of the road and/or cheapest aftermarket parts.
>
> I haven't seen Bendix branded aftermarket brake parts in years. It looks
> like their aftermarket stuff is now part of the Honeywell aftermarket
> product line, which line isn't always the best of the best IMO.

Update. I just put shims on and permatex brake quiet. I gave it a
good test drive and so far so good. THanks for the help!