Tegger wrote:
>> ChaoticEntity@gmail.com wrote in news:1189402352.188080.6440@
>> 57g2000hsv.googlegroups.com:
>>
>
>>
>>> I took a timing light to it and at ~2.5-3k rpm the timing lines up
>>> with the red mark on the pulley.
>>
>
>
> I missed something before...
>
> The timing should be at the middle mark of the three
> at **IDLE** with the Service Check connector shorted.
>
> At 2500rpm it will be WAY off from ANY of the marks! You've done something
> seriously wrong here.

no kidding. shouldn't have to touch the ignition timing if the belt is
set right.


>
> Did you have a factory service manual before doing all the work?
>