Elle wrote:
> I would start by checking the coolant in the cooling system
> reservoir. If it's not between the max and min lines, then
> fill to the max line.
>
> Certain engine control sensors must be immersed in coolant
> to work properly. If the coolant is at all low, they may not
> be immersed. The sensors then send the wrong signal to the
> fuel and air control systems.
>
> Especially if the coolant was recently replaced, do this. It
> costs little and is a common cause of the problem you
> describe.
>
-------------------------------------

Big x2.

'Curly'