momo wrote:
> 1993 Honda Civic 1.5L auto
> After reading tegger link , which advise against cranking the engine
> with
> the wire or cap removed http://www.tegger.com/hondafaq/startproblems.html
> The rotor have a screw but it is not always in a direction that can be
> removed.
> Is there a bolt location that I can turn the rotor without cranking
> the engine ?
> Or can one disconnect the power feed to the distributor (somewhere ?)
> and then crank the engine to get the proper location of the rotor
> screw.
> I am fine with either approach as long as I can get to the screw
> location.
> Thank in advance for the advise.
>
Hi,
Disconnect battery = no chance of damaging ignition parts.
Remove spark plugs = Easy to turn engine with hand.