1993 Honda Civic 1.5L auto
After reading tegger link , which advise against cranking the engine
with
the wire or cap removed http://www.tegger.com/hondafaq/startproblems.html
The rotor have a screw but it is not always in a direction that can be
removed.
Is there a bolt location that I can turn the rotor without cranking
the engine ?
Or can one disconnect the power feed to the distributor (somewhere ?)
and then crank the engine to get the proper location of the rotor
screw.
I am fine with either approach as long as I can get to the screw
location.
Thank in advance for the advise.