"Tegger" <tegger@tegger.c0m> wrote in message
news:Xns99A34ABC381AFtegger@207.14.116.130...
> bigjcw1023@gmail.com wrote in news:1189047482.919331.134400@
> 57g2000hsv.googlegroups.com:
>
>> I replaced my rotors and pads on my 1997 CRV with bendix parts. About
>> 1000 miles later after driving at highway speed for 20 mile or so and
>> then going to slower speed around 35MPH I get squealing from the
>> brakes. I press the pedal to start stopping and the noise stops.
>> What did I do wrong, or miss? The vehicle started doing this before I
>> replaced the brakes, BUT I figured that it was worn parts becuase the
>> pedal vibrated too. The pedal no longer vibrates and the vehicle
>> seems to stop good. Thanks for your input.
>> Joel
>>
>>
>
>
> Try OEM parts, not crappy aftermarket.
>
> Were the anti-squeal shims reinstalled? Was there a tiny dab of Sil-Glyde
> or M-77 put in the correct places on the shims?
>
> --
> Tegger
>
> The Unofficial Honda/Acura FAQ
> www.tegger.com/hondafaq/

My 2000 Si has done the same thing on 2 occassions with the original pads.
Both times I pulled over, stopped, move slightly back and forward and
problem gone. I figured that maybe some debris on the road got temporarily
caught in the brake area or something. Hasn't happened again in the past 5
years (and still on the original pads!)