Ignore the previous posts.

The squeak is from the pad vibrating in the caliper because of
typically, rust on the piston.

Buy yourself a spray can of Permatex Disk Brake Quiet.

Some pads come with a similar coating already sprayed on.

-SP


bigjcw1023@gmail.com wrote:
> I replaced my rotors and pads on my 1997 CRV with bendix parts. About
> 1000 miles later after driving at highway speed for 20 mile or so and
> then going to slower speed around 35MPH I get squealing from the
> brakes. I press the pedal to start stopping and the noise stops.
> What did I do wrong, or miss? The vehicle started doing this before I
> replaced the brakes, BUT I figured that it was worn parts becuase the
> pedal vibrated too. The pedal no longer vibrates and the vehicle
> seems to stop good. Thanks for your input.
> Joel
>