bigjcw1023@gmail.com wrote in news:1189047482.919331.134400@
57g2000hsv.googlegroups.com:

> I replaced my rotors and pads on my 1997 CRV with bendix parts. About
> 1000 miles later after driving at highway speed for 20 mile or so and
> then going to slower speed around 35MPH I get squealing from the
> brakes. I press the pedal to start stopping and the noise stops.
> What did I do wrong, or miss? The vehicle started doing this before I
> replaced the brakes, BUT I figured that it was worn parts becuase the
> pedal vibrated too. The pedal no longer vibrates and the vehicle
> seems to stop good. Thanks for your input.
> Joel
>
>


Try OEM parts, not crappy aftermarket.

Were the anti-squeal shims reinstalled? Was there a tiny dab of Sil-Glyde
or M-77 put in the correct places on the shims?

--
Tegger

The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/