"willy" <gw1004690@onemain.com> wrote in news:C_Nqh.14704$X72.14573
@newsread3.news.pas.earthlink.net:

> Do you mean the PGM-FI Main relay? I have "hot in on or start" current
> on the BLK/YEL fuel pump fuse to PGM-FI Main relay wire. I have "hot
> in start" current on the BLU/RED starter signal fuse to PGM-FI Main
> relay wire. Nothing on the GRN/BLK PGM-FI Main relay to PCM wire.



Yes, I mean the Main Relay.

First go check the diagrams referenced by Mike.

Then, rather than give wire colors (which are different for each model),
give the Main Relay terminals that correspond to what you're checking.
Those are common to all port-FI Hondas.


--
Tegger

The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/