Tegger,
Just a quick update... The ball & spring didn't come out of the
drain plug... they came out of what I thought was a drain plug. Oh well...
Still haven't split the tranny open yet.. was waiting for a manual which a
friend dropped off today.
Unfortunately, the manual covers the tranny but not the clutch, P/P or
flywheel. You wouldn't happen to know where I could find any specs on the
flywheel would you. It has a 'stepped' surface, if thats the correct term.
I would like to get the surface trued but not sure what tolerances and etc
are allowed before a person has to replace it.
Any help would be much appreciated.
thanks,
-dana
"Dana George" <ddgeorge1@verizon.net> wrote in message
news:7KU3g.25826$HC3.1860@trnddc07...
> TeGGeR-
> The spring isn't broken so that was the 1st thing I asked myself...
> what had to happen to let the ball and spring fall out..??
> I'll find out soon when I crack it open, I'll let you know what I find.
> -dana
>
> "TeGGeR®" <tegger@tegger.c0m> wrote in message
> news:Xns97B0E447B8DF2tegger@207.14.113.17...
> > "Dana George" <ddgeorge1@verizon.net> wrote in
> > news:ZqA3g.20019$HC3.16448@trnddc07:
> >
> > > TeGGer-
> > > A rather interesting development in this mystery.... I drained
> > > the
> > > transaxle oil and what do I find in my drain pan but a small, stiff
> > > spring and a steel (detent?) ball....
> >
> >
> >
> > Now that's an odd one. I wonder if the tranny was rebuilt at some point
> and
> > not reassembled correctly, or if the casting is broken somewhere. I've
> > never heard of this before.
> >
> > Does the spring appear broken?
> >
> >
> > --
> > TeGGeR®
> >
> > The Unofficial Honda/Acura FAQ
> > www.tegger.com/hondafaq/
>
>