View Single Post
  #2 (permalink)  
Old 07 Jul 2007, 05:54 pm
Dick
Guest
 
Posts: n/a
Default Re: 2000 accord blower

To get to the cabin air filter, you remove the glove box and the glove
box frame. Then you remove the filter lid from the evaporator, then
pull out the lower A/C filter assembly and upper A/C filter assembly
in that order.

Dick

On Sat, 07 Jul 2007 20:09:46 GMT, "ib" <ib@o2.co.uk> wrote:

>Hi,
>
>The fan (for heater and ac) sounds like it's working fine, on full it roars,
>but very little (almost no) airflow from the vents. The airflow changes
>direction when I move it from face to demist, etc, so I think the control is
>working ok. The sound changes when I change the external / recirc switch, so
>I think this is also working, although when I do this it doesn't increase
>the airflow. I've seen cars with blocked cabin filters before, but these are
>normally only on the outside, so going to recirc increases the flow to
>normal.
>
>Does the cabin filter in this car in the loop for both recirc and fresh?
>That would explain it maybe. Or is it something else? Where is the cabin
>filter on these?
>
>Many thanks.
>
>
>



--
Posted via a free Usenet account from http://www.teranews.com

Reply With Quote