View Single Post
  #2 (permalink)  
Old 30 Jun 2007, 08:22 pm
jim beam
Guest
 
Posts: n/a
Default Re: Door-open switch wiring? key-in buzzer wiring?

john.d.mcc wrote:
> Hello all,
> I've got a 1996 Civic Hatchback DX.
>
> I'm irritated by the buzzer that dings when the key is in and the door
> is open.
> I wish to disable the buzzer.
> It may be that the simplest way to do this is to short-circuit the
> door-open switch so that it is permanently 'closed'.
> Can anyone tell me which wires I need to deal with, or should I just
> remove the door-frame paneling and access the switch directly?
> Alternatively, is there another/better way to disable this buzzer?
>
> Thanks for your help.
> John
>

if you remove the steering column cover, there's switches attached to
the key barrel. on one side is a little contact switch with a small
black prong that goes into the barrel mechanism and that is activated on
key insertion. if you cut the prong off, it won't ding any more.

but be careful!

1. you'll be working in the area of the airbag.
2. this works for older vehicles, but you need to check that /your/
vehicle will still operate without this switch being activated. the ecu
looks for certain things to be present on start-up. i don't know if the
key sensor is on the list for your vehicle, but if it is, you'll regret
the mod.

otoh, just get over your annoyance. that alarm is actually useful if
you don't want to lock your keys in the car.
Reply With Quote