motsco_ wrote:
> Siskuwihane wrote:
>> 1999 CR-V, 93k, has a clunking-like noise from front end when going
>> over bumps, etc. Have replaced the sway-bar links and yesterday
>> replaced the upper arm flange bolts. Seems like noise is now worse
>> after flange bolt replacement. I did the body sealant scraping and
>> torqued them to 73 Nm (54 Ft.lb or 648 inch lb). My torque wrench
>> measures in inch lbs and I am assuming my math was correct in
>> converting. Any suggestions on other possibilities? I am going to
>> check the shock mounting bolts as soon as the wife gets home with the
>> vehicle. TIA.
>>
> =================================
>
> You got the flange bolts idea from the TSB ?
>
> http://www.tegger.com/hondafaq/tsb/crv/index.html
>
> The shock mounting bolts sounds like a good next step. I can't say about
> your math . . my converter doesn't handle that one.

Curly,
(and anyone who needs it), go to
<http://joshmadison.com/software/convert/>
and get 'convert.exe'. It's magic!


--
Graham W http://www.gcw.org.uk/ PGM-FI page updated, Graphics Tutorial
WIMBORNE http://www.wessex-astro.org.uk/ Wessex Astro Society's Website
Dorset UK Info, Meeting Dates, Sites & Maps
Change 'news' to 'sewn' in my Reply address to avoid my spam filter.