1999 CR-V, 93k, has a clunking-like noise from front end when going
over bumps, etc. Have replaced the sway-bar links and yesterday
replaced the upper arm flange bolts. Seems like noise is now worse
after flange bolt replacement. I did the body sealant scraping and
torqued them to 73 Nm (54 Ft.lb or 648 inch lb). My torque wrench
measures in inch lbs and I am assuming my math was correct in
converting. Any suggestions on other possibilities? I am going to
check the shock mounting bolts as soon as the wife gets home with the
vehicle. TIA.