On Wed, 21 Dec 2005 19:20:22 -0700, "Bryan"
<NoSpam@AtMyEmailAddress.com> wrote:

>I would try something like a Dremel with a cutting wheel. Just cut a groove
>on two sides opposite from each other as close as possible without touching
>the stud and then jamb a screwdriver in the slot. It should break off
>without damaging the stud.
>
>
>"DaveK" <skulka22@hotmail.com> wrote in message
>news:t37hq196ahlv7eqqs4a463jj8hq7kb4mlk@4ax.com.. .
>> Without using torches?
>

A friend once got stuck in BFE with a flat and no "key" to the wheel
lock of his new used car. They were able to get it off by hammering a
just slightly too small socket onto the nut.