> "Mark" <anon40629@hotmail.com> wrote about a month ago: Good morning.
>
> Water is leaking into the trunk of my 1991 Accord EX.

Following a suggestion from several people, I removed the taillights
and cleaned the gaskets and reinstalled them with a generous
application of silicone caulk. This took care of the water that was
leaking around the taillights.

Unfortunately, I still have a small leak into the left rear corner of
the trunk. I removed the side trim panel and discovered that
the water is coming in around the edges of the ventilation outflow
valve. Apparently water running down the side of the car gets
underneath the bumper and finds its way in through this area.

So my plan of attack is to remove the rear bumper, inspect
the area around the outflow valve, and correct the leak with
a new gasket and/or silicone caulk where the outflow valve
is installed.

Does that sound like a reasonable plan?

Thanks
-Mark