jim beam <spamvortex@bad.example.net> wrote in
news:Lpydnfe-5pXuLErYnZ2dnUVZ_uvinZ2d@speakeasy.net:

> Grumpy AuContraire wrote:
>>
>>
>> jim beam wrote:
>>
>>> Tegger wrote:
>>>
>>>> jim beam <spamvortex@bad.example.net> wrote in news:dbKdndIaoY-
>>>> p9EvYnZ2dnUVZ_t_inZ2d@speakeasy.net:
>>>>
>>>>> Tegger wrote:
>>>>>
>>>>>> solocrx <solocrx.2m4cl5@no-mx.nodomain.com> wrote in
>>>>>> news:solocrx.2m4cl5
>>>>>> @no-mx.nodomain.com:
>>>>>>
>>>>>>> Can you help me out and tell me what the valve settings are or
>>>>>>> tell me
>>>>>>> where i might find them for a jdm ZC 1.5 thank you very much
>>>>>>>
>>>>>>>
>>>>>>
>>>>>>
>>>>>> Intake: 0.005"-0.007"
>>>>>> Exhaust 0.006"-0.008"
>>>>>>
>>>>>> Checked and adjusted dead-COLD.
>>>>>>
>>>>> what's that in [honda] metric?
>>>>>
>>>>
>>>>
>>>> What? I put an "inches" symbol in there, so...
>>>
>>>
>>> i don't have feeler gauges for 0.127mm or 0.1778mm. my point is,
>>> original spec is metric, so for anyone that has metric gauges
>>> [ME!!!], they can be anal and set without fractional b.s.
>>>
>>
>>
>>
>> But, but, but... .005-.007 would be decimal..
>
> but but but, decimal is not metric...



They're BOTH "decimal". Just one is Imperial and the other Metric.

I don't see anything I provided that was in binary, octal or
hexadecimal.


--
Tegger

The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/