jim beam <spamvortex@bad.example.net> wrote in
news:KPWdnbf-Rdok8EvYnZ2dnUVZ_sOknZ2d@speakeasy.net:

> Tegger wrote:
>> jim beam <spamvortex@bad.example.net> wrote in news:dbKdndIaoY-
>> p9EvYnZ2dnUVZ_t_inZ2d@speakeasy.net:
>>
>>> Tegger wrote:
>>>> solocrx <solocrx.2m4cl5@no-mx.nodomain.com> wrote in
>>>> news:solocrx.2m4cl5 @no-mx.nodomain.com:
>>>>
>>>>> Can you help me out and tell me what the valve settings are or
>>>>> tell me where i might find them for a jdm ZC 1.5 thank you very
>>>>> much
>>>>>
>>>>>
>>>>
>>>>
>>>> Intake: 0.005"-0.007"
>>>> Exhaust 0.006"-0.008"
>>>>
>>>> Checked and adjusted dead-COLD.
>>>>
>>> what's that in [honda] metric?
>>>
>>
>>
>> What? I put an "inches" symbol in there, so...
>
> i don't have feeler gauges for 0.127mm or 0.1778mm. my point is,
> original spec is metric, so for anyone that has metric gauges [ME!!!],
> they can be anal and set without fractional b.s.



jimbo, you're being silly here. Silly for the sake of
..0001 inch.

For more silliness, see
www.engrish.com

The Metric equivalents to the Imperial measurements I gave are:
Intake: 0.13-0.17mm
Exhaust: 0.15-0.19mm

Happy now? I am. It's Friday and I don't have to do anything work-like
until Monday.

--
Tegger

The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/