ecarecar wrote:
> With a mire 5 degrees out, my 98 Civic drive-side window started binding
> about
> half way up. With coaxing and force I got it 75% up and got home.
>
> When I got home I happened to notice the problem was that the window
> got on the
> outside of the rubber "gasket" around the window frame. What happened
> to it? Are there
> any good diagrams on repair?

----------------------------------------

Diagrams at www.slhondaparts.com are good. Finding the real procedure
would help too. These instructions are for removing the door panel (and
install tweeters) from a first generation CR-V. Should be all you need.
> http://www.hondasuv.com/pdf/crv/firs...tweeterkit.pdf

There's TSB's for your Civic at >
http://www.tegger.com/hondafaq/tsb/civic/index.html

'Curly'