O.K. I tried that and when I was messing around with the wires with the
brake depressed the middle and inside left tailight came on
momentarily. I started to jiggle the wires going into a grey harness
and the lights flickered, so it must be that. I have no idea how to
get that thing out though. Any ideas?

Thanks.
TeGGeR® wrote:
> "falstaff" <wkman@yahoo.com> wrote in
> news:1159873929.788538.326340@m73g2000cwd.googlegr oups.com:
>
> > Yes, the tail and signal lights are all working, just not those brake
> > lights. The "brake light" lamp on the dash is on (not the BRAKE).
>
>
> Then the system thinks you have a burned out bulb.
>
>
> > Also, the cruise control went out about a year ago. I understand the
> > stop light switch control both the brake lights and the cruise
> > control, but can it fail for only some of the brake lights? Any idea
> > how I go about testing and replacing the gizmo?
> >
>
>
> As I said in my previous message:
> "With a bulb removed and a helper stepping on the brake pedal, can you see
> voltage from each of the buttons at the bottom of the socket to a ground?"
>
> Try that first. Check the sockets for corrosion. If you definitely see no
> voltage at all, from the buttons at the bottom of the socket, AND if all
> the electrical connectors are actually conmnected!, THEN you start
> investigating other stuff.
>
>
> --
> TeGGeR®
>
> The Unofficial Honda/Acura FAQ
> www.tegger.com/hondafaq/