"Nasty" <nastymychain@tampabay.rr.com> wrote in
news:hT1Ug.25425$Rr.4989@tornado.tampabay.rr.com:

>
> "'Curly Q. Links'" <motsco__@interbaun.com> wrote in message
> news:4520A45D.E72D513E@interbaun.com...

>>
>> The torque driver is for removing (the Phillips screws) whenever you
>> have to pull the rotors. Trying to remove (the Phillips screws)
>> without one is like teaching a pig to sing.
>
> The slot stripped out real quick on both of them using a standard
> phillips.
>
>>
>> You only have to snug them by hand since they seem to stay in just
>> GREAT.
>
> Well mine stayed in Damn Great!
>
>
>
>


They rust. Sometimes a drill is the only solution.

I have had better luck smearing the screw (and its hole) with aluminum
anti-seize before installing it, then wiping off the extruded excess.
This allows more successful use of an impact driver.

--
TeGGeR®

The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/