On 30 Jul 2006 09:32:38 -0700, "KOS" <computerstuff2@excite.com>
wrote:

>Hi, Just removed the clock from the dash, removed the plastic cover and
>now have the green 'computer' board facing me... (Initial problem-
>light doesnt work on clock). Where is the clock bulb located? I see a
>part that says 11, 47, 25v.. Is that the bulb? or will that control
>the emergency flasher???
>Please help
>Thanks
>KOS

My manual is for a 1999, but I assume they are the same. The clock
back light is integral to the clock. The lamp is a 0.7 watt LED, and
is powered from pin 1 on the clock. That pin is fed with a yellow
wire from the fuse/relay box. If you can find the yellow wire in the
5-pin connector, then trace that to the LED, you will have found it.

The Hazard Warning switch is connected to a 10-pin connector (only 8
used.) The clock is on a 5-pin connector. The two aren't related.
The Hazard switch is just using the clock face as a place to hold it.

Dick