View Single Post
  #1 (permalink)  
Old 26 Oct 2005, 02:58 pm
Torquedtootight
 
Posts: n/a
Default Engine turns but will not start

I've been troubleshooting my wife's car for two days now. Everything
seems to point to the distributor. Tests have shown that the primary
and secondary ignition coils are operational, that voltage is reaching
the ignition control module (icm) and that there is voltage between the
module and the coils. New timing belt. New rotor. New distributor cap.
wires are only 16 months old. No spark!

I'm stumped! By the way, I also checked the ckp/tdc/cyp sensors. Any
suggestions?

Reply With Quote